2 szelepes manifoldok (elzáró és leeresztő) Archívum

2 szelepes manifoldok (elzáró és leeresztő)

Application

For isolating, calibration and draining (venting) pressure gauges and transmitters
Using the Isolate & Bleed Valves

In normal operation the “isolate” valve is open while the “vent” valve is closed
To remove the instrument, first close the “isolate” valve, then open the “vent” valve to relieve pressure upstream of the “isolate” valve
Calibration option

By connecting a test gauge to the vent port, it is possible to check the calibration of the installed instrument without removing it from the installation

Stewart termékáttekintő Stewart Buchanan Gauge Ltd.

Rendezés Alapértelmezett

Megjelenítés 20 Termék / oldal

Remote Mount Female:Female 413bar:6000psi
J2
Remote Mount Female:Female 413bar:6000psi
Angled Bonnet Female:Female 413bar:6000psi
K2
Angled Bonnet Female:Female 413bar:6000psi
Remote Mount Male:Female 413bar:6000psi
L2
Remote Mount Male:Female 413bar:6000psi
Direct Mount Pipe To Flange 413bar:6000psi
M2
Direct Mount Pipe To Flange 413bar:6000psi
Enclosure Direct Mount Pipe To Flange 413bar:6000psi
N2
Enclosure Direct Mount Pipe To Flange 413bar:6000psi
Flat Face Remote Mount 413bar:6000psi
O2
Flat Face Remote Mount 413bar:6000psi
Direct Mounted Transmitter Manifold 413bar:6000psi
Q2
Direct Mounted Transmitter Manifold 413bar:6000psi

2 szelepes manifoldok (elzáró és leeresztő)

Remote Mount Female:Female 413bar:6000psi

Angled Bonnet Female:Female 413bar:6000psi

Remote Mount Male:Female 413bar:6000psi

Direct Mount Pipe To Flange 413bar:6000psi

Enclosure Direct Mount Pipe To Flange 413bar:6000psi

Flat Face Remote Mount 413bar:6000psi

Direct Mounted Transmitter Manifold 413bar:6000psi

Navigáció

Gyártói csoportok

Elérhetőségek